Matek F405 Wing Flight Controller

Brand: Matek

Product Code: MATEK_F405WING

Availability:Out of stock

$49.99 49.99

If you're looking for the go-to flight controller for iNav and flying wings, then you've come to the right place. Matek's intro into the Wing market is off to a good start with the specs on this board. 

FC Specifications

  • MCU: 168MHz STM32F405
  • IMU: MPU6000 accelerometer/gyro (SPI)
  • Baro: BMP280 (I2C)
  • OSD: INAV OSD w/ AT7456E chip
  • Blackbox: MicroSD card slot (SD/SDHC)
  • VCP & 6x UARTs
  • 2x Motors, 7x Servos outputs
  • 2x I2C
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • Built-in inverter for SBUS input (UART2-RX)
  • PPM/UART Shared: UART2-RX
  • SoftSerial on TX2 pad
  • Battery Voltage Sensor: 1:10 (Scale 1100)
  • WS2812 Led Strip: Yes
  • Beeper: Yes
  • RSSI: Yes

    FC Firmware

    • INAV Flight
    • Target: MATEKF405SE


      • Input voltage range: 9~30V (3~6S LiPo) w/TVS protection
      • 2x ESC power pads
      • Current Senor: 104A,  3.3V ADC,  Scale 317

        BEC 5V output

        • Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
        • Continuous current: 2 Amps, Max.3A

          BEC 9V /12V output

          • Designed for Video Transmitter, Camera, Gimbal etc.
          • Continuous current: 2 Amps, Max.3A
          • 12V option with Jumper pad

            BEC Vx output

            • Designed for Servos
            • Voltage adjustable, 5V Default, 6V or 7.2V via jumper
            • Continuous current: 5 Amps, Max.6A
            • Output Ripple: 50mV (VIn=24V, VOut=5V@5A load)

              BEC 3.3V output

              • Designed for Baro / Compass module and Spektrum RX
              • Linear Regulator
              • Continuous current: 500mA


                • Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
                • Dimensions: 56 x 36 x 13 mm
                • Weight: 25g